It's All About Home Sweet Home  
 
   

Boilers

 
Trinity Ti 150   Trinity® High Efficiency Boiler by NTI®

Great Savings... The superb efficiencies and state-of-the-art combustion systems of the Trinity boiler means little heat is wasted, less natural gas or propane is used, and homeowners save money.

Years of Dependability... NTI customers know... our boilers are built to last a lifetime! With an advanced ignition system, and a top-quality heat exchanger, the Trinity boiler represents the highest standard in top-quality boilers.

Environmental... The Trinity boiler meets or exceeds North American energy and emissions regulations.We’re doing our part to protect the environment for the future.

NTI’s new state-of-the-art combustion system allows the Trinity boiler to modulate the burner to the exact size required to meet the conditions of the system. The Trinity boiler incorporates an electronic state-of-the-art combustion system to reduce the amount of gas that is injected into the burner, to ensure proper combustion throughout the full range of modulation. This system also compensates for extended venting; therefore, adjustments are not required between short and long vent runs. The Trinity boiler is a totally sealed combustion system: all combustion air is drawn from outside, used for combustion and then expelled. This eliminates any need for fresh air intake into the room, thereby decreasing heating costs.
NTI Heat Exchanger

Exclusive NTI heat exchanger

 

NTI has developed a sophisticated heat exchanger that provides virtually endless hot water, at unheard-of efficiencies. The condenser does not use aluminum but is constructed totally from stainless steel, which is a proven material for condensing appliances.

The Trinity Boiler utilizes its modulation combustion system to electronically increase or decrease the flame size, depending upon the required flow and water temperature. As the water is instantaneously heated and regulated, a storage tank is not required, and energy is not lost due to typical tank standby losses. The Trinity Boiler can deliver up to 5.5 US gallons of water per minute at a constant temperature of 110ºF. The Trinity Boiler system automatically gives priority to the domestic hot water system to ensure that all your family’s hot water needs are met.

  • Available in both Natural Gas and Propane versions with a modulation system that eliminates additional models.
  • State-of-the-art sealed modulation combustion system with hot surface ignition.
  • Patented 316L stainless condensing heat exchanger provides ultimate efficiencies.
  • All connections are conveniently located for ease of installation.
  • Wall mount configuration saves valuable floor space.
  • Vents easily with conventional ABS, PVC or CPVC plastic piping.
  • The TRINITY has industry-leading modulation rates, which
    significantly increases comfort while reducing cycling and fuel
    consumption.
  • The distinctive casing design reduces costly standby losses, while virtually eliminating combustion noises.
  • High-capacity plate heat exchanger on combination models provides ample domestic hot water.
  • The TRINITY is certified, designed and rated to strict CSA, AGA, ASME and CSAus codes.
Aruba  

Crown® Cast Iron Aruba 3® Boiler

ARUBA 3 is CROWN's best selling gas-fired, hot water boiler. It comes in a wide range of sizes from 37,000 to 295,000 BTU/HR input.

Crafted with a rugged, cast iron heat exchanger and stainless steel burners that are both backed by a lifetime limited warranty, the ARUBA 3 offers proven-in-service reliability, simplicity of design and economy in its purchase price and consumption of fuel.

The ARUBA 3 is available with standing pilot or electronic ignition for greater energy efficiency. Honeywell controls provide reliability, ease and convenience.

Attractive and durable, the two-tone, powder-coated jacket resists scratching. Plus, it's insulated to retain heat. The ARUBA 3 meets all national standards, and the heat exchanger meets the specifications of the American Society of Mechanical Engineers.

ARUBA 3 is the latest in a series of designs that CROWN engineers have created for ease of use, constructed for long life and engineered to provide the most value for each energy dollar. That's CROWN's commitment to quality.

ARUBA 3 has all these features for optimum safety and performance:

For Safety:
Bullet Can be installed directly on non-carpeted combustible floors
Bullet Fully assembled, ready for installation
Bullet Factory tested for flame quality, leakage, control system operation and overall performance
Bullet Combination high limit/circulator relay control regulates water temperature
Bullet Spill switch detects venting problems
Bullet Rollout switch detects heat exchanger blockage
Bullet ASME relief valve (set at 30 psi)

For Performance:

Bullet Cast iron heat exchanger with a lifetime limited warranty
Bullet Stainless steel burners with a lifetime limited warranty
Bullet Built-in draft hood fits in low spaces
Bullet Aquastat mounted directly into heat exchanger for improved response
Bullet Reliable Honeywell controls
Bullet Appliance quality, powder-coated jacket
Bullet Fiber-glass insulation to minimize wasteful heat loss
Bullet High performance circulator
Bullet Motorized vent damper reduces chimney losses
Bullet Temperature/pressure gauge
Bullet Drain valve
 
   
/Home/Heating/Cooling/Tankless/Service/
/About Us/ Contact Us/Indoor Air Quality/
/Boilers/Controls/